Content Preview
TB194 Rev1 Standard One Shot Overlay Parameter Setup
Overview
This technical document will provide you with an easy to follow parameter list for configuring your control with
the standard one shot overlay
Standard One Shot Overlay
Parameter Settings
1 From the main screen press F1 Setup F3 Config enter default password 137 press enter F3 Params
and finally F3 Next Page to get to the Aux key parameters 188 199
2 Now refer to the table for One shot parameter settings Â
Standard One Shot Overlay
Aux Key One Shot Parameter Value
1 4th Axis Clamp 188 0 configured through PLC
2 Rectangular Pocket 189 8
3 Circular Pocket 190 7
4 Drill 191 6
5 Drill Array 192 18
6 Drill Bolt Hole Circle 193 17
7 Face 194 10
8 Frame 195 9
9 Set Absolute XYZ 196 16
3 After all parameters are set press F10 Save
4 One shots are now configured
Document History
Rev1 Created on 2006 11 16