Content Preview
TB153 Rev1 Windows 2000/XP Patch For Offline Intercon
Overview
Some users may experience problems trying to run Intercon Offline software on a PC running Windows 2000 or
Windows XP This document contains detailed instructions on how to ΓpatchΓ the Intercon executable file
Procedure
1 Download the patch
The required patch can be found at the following location
http //clio rice edu/djgpp/ntsbrkpat zip
2 Unzip the downloaded patch
Once you have downloaded the patch you must unzip the file to the C \CNC7 directory that Offline Intercon installed on
your PC
3 Apply the patch
To apply the patch you will need to go to a Command Prompt This can be reached through the Start Menu
Start Menu > Programs > Accessories > Command Prompt
Once the command prompt opens up you will need to type the following command to apply the patch
C \CNC7\SBRKPAT EXE INTERCON EXE
Note The space before intercon exe should receive a message saying the file was patched You can now run Offline
Intercon without experiencing any problems
You can also obtain these files from Centroid Technical Support 814 353 9256 or email support@centroidcnc com
Document History
Rev1 Created on 2003 11 03 by #000